Descriptionn/a

Descriptionn/a

Descriptionn/a

DescriptionThis CANopen profile specifies generic CANopen digital and analog input and output devices. Devices compliant to this specifications use communication techniques, which are conform to those described in the CANopen application layer and communication profile specification. In addition, programmable I/O devices may use communication techniques, which conform to those described in the CANopen additional application layer functions. This device profile specification consists of several parts: Part 1: Generic I/O devices, Part 2: Joysticks. This part of the device profile specifies the CANopen interface for modules with generic analog and digital inputs and outputs. The first default TPDO and RPDO support up to 64 digital inputs, respectively up to 64 digital outputs both grouped byte-wise. The remaining default PDOs transmit or receive up to 12 analog inputs respectively up to 12 analog outputs both with a 16-bit resolution. All TPDOs are triggered by change-of-state. Therefore, default TPDOs containing analog inputs are disabled. Besides the default byte-wise access to digital I/Os, optional bit-, word-, and double-word access may be supported. Besides the default 16-bit resolution for the analog I/Os, optional 8-bit, 32-bit, floating-point and manufacturer-specific resolutions may be supported. Several parameters are specified to configure the input and output behavior (e.g. trigger conditions for inputs, output behavior in case of internal device failures.

DescriptionThis CANopen profile specifies generic CANopen digital and analog input and output devices. Devices compliant to this specifications use communication techniques, which conform to those described in the CANopen application layer and communication profile specification. In addition, programmable I/O devices may use communication techniques, which conform to those described in the CANopen additional application layer functions. This profile consists of several parts: Part 1: Generic I/O devices, Part 2: Joysticks. This part of the profile specifies the CANopen interface for joysticks and similar devices, e.g. foot-pedals.

DescriptionThis specification represents the CANopen device profile for generic digital and analogue input and output modules. Devices compliant to this specification use communication techniques, which conform to those described in the CANopen application layer and communication profile specification. In addition, programmable I/O devices may use communication techniques, which conform to those described in the CANopen additional application layer functions. In the appendices, some specific I/O devices are defined.

DescriptionThis document recommends how to implement the CANopen interface for operator environments with human-machine interface functionality. It is based on the CiA 401 CANopen profile for generic I/O modules. It recommends how to use the digital and analog process data parameters specified in CiA 401. It also recommends a mapping of these parameters into PDOs.

DescriptionThis part of CANopen device profile conformance test plan contains additional tests for generic I/O modules, which are tested for conformity according to CANopen device profile generic I/O modules. The additional tests verify entries in EDS and object dictionary, which are defined in CANopen device profile generic I/O modules. Furthermore additional test steps verify object coherences that are defined in that device profile. To achieve a certain level of conformity the CANopen device shall pass the corresponding tests defined in CANopen conformance test plan plus those defined in this part of the document series.