Headquarters
Epec Oy
PO Box 194
FI-60101 Seinäjoki
Phone: +358-20-7608111
Email: info@epec.fi
URL: http://www.epec.fi
Visit and delivery addresses:
Laakeriväylä 1
FI-60100 Seinäjoki
Tampere Office
Korkeakoulunkatu 7
FI-33720 Tampere
Phone: +358-20-7608111
E-mail: info@epec.fi
Visit and delivery addresses:
Korkeakoulunkatu 7, 6th floor
FI-33720 Tampere
Epec China
Room 402, #2 Building,
690 Bibo Road, Zhangjiang Hi‑Tech Park,
Shanghai 201203, P.R. China
Phone: +86-139-1796-6087
Email: wanpeng.li@epec.fi
In English:
Phone: +358-40-5851-218
Email: vesa.ala-mutka@epec.fi
Turku office
Tykistökatu 4
FI-20520 Turku
Phone: +358-20-7608111
E-mail: info@epec.fi
Visit and delivery addresses:
Tykistökatu 4, 6th floor
FI-20520 Turku
Kuopio office
Viestikatu 3
FI-70601 Kuopio
Phone: +358-20-7608111
E-mail: info@epec.fi
Visit and delivery addresses:
Viestikatu 3,
FI-70601 Kuopio
USA office
Phone: +1 (715) 3679171
E-mail: vesa.ala-mutka@epec.fi
Visit and delivery addresses:
1840 N Farwell, apt #1008,
US-Milwaukee, WI, 53202
Netherland office
Bram Engineers B.V.
Ebweg 57
2991 LS Barendrecht
The Netherlands
Phone: +358-20-7608111
Email: info@epec.fi
Distributors:
TRITECNICA S.p.A.
E-mail: info@tritecnica.it
Phone: +39 02 541941
Viale Lazio, 26, 20135 Milano, Italy
MEDATech
Post address:
35 Sandford Fleming Dr. Collingwood, ON, L9Y 5A6, Canada
DAS Co., Ltd.
Post address:
128 Bibong-ro, Bibong-myeon, Hwaseong-si
Gyeonggi-do, 18284 Republic of Korea
OEM Automatic sp. z o.o.
E-mail: dariusz.liber@pl.oem.se
Post address:
Działkowa 121 A, 02-234 Warszawa, Poland
NIP 522-21-44-624
REGON 012678744
KRS 0000126873
OEM Automatic AB
E-mail: andreas.friberg@oemautomatic.se
Post address:
Dalagatan 4, 57328 Tranås, Sweden
TELEMATION, Australia
Phone: +61-(0)8 6253 4000
Email: sales@teleradio.com.au
Post address:
Perth, Australia
28 Sorbonne Crescent, Canning Vale, WA, 6155
TELEMATION, australia
Phone: +61 (0)3 8906 2270
Email: sales@teleradio.com.au
Post address:
Victoria, Australia
Suite 34, 5A Hartnett Close, Mulgrave, VIC, 3170
TELEMATION, australia
Phone: +61-(0)459 990 976
Email: sales@teleradio.com.au
Post address:
Sydney, Australia
C/O WOTSO Level 1/5 George St, North Strathfield, NSW 2137
TELEMATION, New Zealand
Phone: +64 (0)8 0045 6850
Email: sales@teleradio.com.au
Post address:
New Zealand
3, Factory Drive, Rolleston, 7675
Epec control units for mobile machines
Your Challenge, Our Inspiration.
Epec control units are extremely compact, powerful and robust multifunction controllers:
- Specially designed for extreme conditions
- Open and configurable I/O interface
- Open solution. Not tied to any specific hydraulic component and sensor manufactures
- Programmed by using Codesys in a PLCopen environment
- Documented software libraries
- boom controlling
- joystick
- hydraulic valves
- automatic software downloading
- diagnostics features
- parameter handling
- engine control
- fully programmable CAN interface
- Easy and flexible configuration of control system (MultiTool)
Epec multipurpose control units are excellent base for embedded machine control systems. All the units have the same robust environmental features but the I/O interface allocation varies according to the product type.
The units have an open I/O interface which makes it easy to connect sensors, actuators, joysticks and other devices from most common manufacturers. This makes it relatively easy to optimize the whole control system both in technical and economical way.
Epec multipurpose control units have optimized number of both input and output pins to be used in numerous roles in the control system. The total number of I/O pins is 20–65 depending of the product. I/O pins includes digital inputs and outputs, analog inputs, pulse inputs, proportional (PWM) outputs and feedback inputs or upside current measurement. The type of each input is determined by the user application software allowing flexible use of the controller.
The controllers are used in very hard environmental conditions (IP67) thus they endures cold, heat, vibration, moisture and impacts easily. This makes the installing also easy as the modules do seldom require any extra protection. All these control units conforms the automotive E17 standards and have a shock endurance up to 100 G.
Heavy duty industrial AMPSEAL or LEAVYSEAL connectors help installing both in machine factory and in the field. Each connector is color coded and mechanically keyed to suit only into the right place. The connector type is specially designed for wire harness use in volume production.
In addition to open I/O interface, Epec control units have 1-4 CAN interfaces. CAN interfaces are CANopen compatible and user programmable enabling e.g. SAE J1939 and Isobus communications also.
Controllers are PLCopen programmable which makes the programming work easy and convenient shortening development time for new systems. Codesys programming tool provides with easy graphic environment for developers to work with.
For further information about Epec multipurpose control units (Epec EC44 Control Unit, Epec 6200 Remote Access Unit, Epec SL84 Safety Control Unit, Epec 3606 Control Unit, Epec SC52 Safety Control Unit, Epec XS6C Central Unit, Epec 5050 Control unit, Epec 4602 Control Unit, Epec 3724 Control Unit, Epec 3720 Control Unit, Epec 6505 Display Unit, Epec 6807 Display Unit, Epec 6510 Display Unit) and other Epec products supporting CANopen and SAE J1939, please visit our website http://www.epec.fi.